Grime, mildew and stains build up a little at a time until one day the outside of your property looks years older. Sidewalk & Walkway Cleaning for Exposed Aggregate in Meadowbrook, AL brings it back, usually in a single visit. With exposed aggregate, the right approach is moderate-pressure wash.
How we clean it
Cleaning solution: A concrete pre-treatment and degreaser as needed.
Caring for exposed aggregate
Exposed aggregate concrete has stones showing at the surface. Too much pressure can loosen stones at the edges, and the surface looks best when cleaned and resealed.
Avoid: High pressure at edges and cracks, which can pop out aggregate.
How often: Clean yearly; reseal every 2-3 years.
Is it time for sidewalk & walkway cleaning for exposed aggregate?
- Slippery paths after rain
- Green or black growth along shaded edges
- Gum, leaf stains or rust spots
- Uneven, blotchy color
Where the grime comes from
- Shade and moisture along the house
- Foot traffic and dropped food or gum
- Leaves and berries that stain
- Sprinkler overspray
What you can do yourself
- Sweep away leaves before they stain
- Scrub small slippery patches with a stiff brush and a deck or patio cleaner
- Trim plants that keep paths shaded and damp
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
Common mistakes to avoid
- Slipping on wet, treated surfaces
- Water and debris sprayed onto doors, windows and cars
- Lifting loose joint material between slabs
Our process for sidewalk & walkway cleaning for exposed aggregate
- Sweep and inspect
- Pre-treat growth and stains
- Clean with a surface cleaner
- Detail edges and steps
- Rinse and post-treat
How much does sidewalk & walkway cleaning for exposed aggregate cost?
What moves the price:
- Size: square footage of siding, roof or flatwork
- Condition: heavy growth, old stains and peeling finishes take longer
- Access: number of stories, roof pitch, slopes and how close we can park
- Add-ons: sealing, gutter brightening and other services done in the same trip
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Other services for exposed aggregate
- Pressure Washing for Exposed Aggregate
- Driveway Cleaning for Exposed Aggregate
- Patio Cleaning for Exposed Aggregate
- Pool Deck Cleaning for Exposed Aggregate
- Concrete Sealing for Exposed Aggregate
- Oil Stain Removal for Exposed Aggregate
Local sidewalk & walkway cleaning for exposed aggregate for Meadowbrook, AL
Shaded driveways, walkways and pool decks in Alabama grow black mildew and algae quickly and can become slippery. Pre-treating the growth before washing, and post-treating after, keeps them clean longer than pressure alone.
Spring pollen season in Alabama coats houses, cars, screens and patios in a yellow-green film, and pollen gives mildew something to feed on. Many homeowners book their wash after pollen season ends so the house stays clean longer.
Red clay soil is common in parts of Alabama. Rain splashes it onto the bottom of the siding, walls and walkways, and its iron-rich color can stain light surfaces. It usually needs a dedicated clay or rust cleaner rather than pressure alone.
We provide sidewalk & walkway cleaning for exposed aggregate across Meadowbrook (ZIP code 35242) and nearby towns including Lake Purdy (2.1 mi), Highland Lakes (2.6 mi), Brook Highland (2.7 mi) and Indian Springs Village (4.6 mi). Call (555) 010-0000 for a free quote in Meadowbrook.
Sidewalk & Walkway Cleaning for Exposed Aggregate: frequently asked questions
How much does sidewalk & walkway cleaning for exposed aggregate cost in Meadowbrook, AL?
Sidewalk & Walkway Cleaning for Exposed Aggregate typically costs $100-$250 for a typical front walk and side paths, and usually takes About 1 hour. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for sidewalk & walkway cleaning for exposed aggregate?
For exposed aggregate: usually 1,500-2,500 PSI with a surface cleaner. What we avoid: high pressure at edges and cracks, which can pop out aggregate. We keep the pressure even and controlled, with the right tools for the surface.
Is sidewalk & walkway cleaning for exposed aggregate safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule sidewalk & walkway cleaning for exposed aggregate?
Clean yearly; reseal every 2-3 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.